Description
Details
Strike RMR to ACRO Adapter Plate
The Strike RMR to ACRO Adapter Plate is a convenient and versatile solution for mounting an Aimpoint® ACRO P-1/P-2 (or other ACRO footprint optics) on an RMR footprint slide or RMR optic mount. This mount is designed to work with both front RMR footprint recoil bosses and indexing posts, ensuring a secure and stable fit. The package includes front mounting posts for use with RMR fitment SI LITESLIDE or Strike Slide. Made from high-strength 6061-T6 aluminum, this mount is lightweight and durable. The included hardware is compatible with both standard (#6-32) and metric (M3) screw holes, making installation quick and easy. For hard use or just a good time at the range, the Strike RMR to ACRO Adapter Plate is an essential accessory for mounting your Aimpoint® ACRO P-1/P-2, Steiner MPS or other ACRO footprint optics on an RMR footprint slide or RMR optic mount.
Package Contains:
- x1 Strike RMR to ACRO Adaptor Plate
- x2 #6-32x1/4" T10 Flat
- x2 M3x6mm T10 Flat
- x2 Alignment post [Large]
- x1 Torx tool [T10]
- x1 Loctite® Threadlocker Blue 243®
Description:
- Easily adapt RMR footprint to work with Aimpoint® ACRO footprint sights
- Works with front RMR footprint recoil bosses/indexing posts
- Also includes SI front mounting posts for use with RMR SI LITESLIDE/Strike Slide
- Hardware included for both standard (#6-32) and metric (M3) screw holes
- Lightweight and high-strength
- Machined from 6061-T6 aluminum
Specifications:
- Length: 45.14mm(1.78")
- Width: 30.00mm(1.18")
- Height: 6.70mm(0.26")
- Weight: 0.42 oz
- Weight w/ Pkg: 0.90 oz
Red Dot Compatibility:
- Aimpoint® ACRO P-1, P-2
- Steiner MPS (Micro Pistol Sight) [see NOTE]
- Atibal Sights e2 Enclosed Red Dot
- Lucid Optics E7
- Lead and Steel Pandora PB-3 Micro Red Dot Sight
- Viridian Weapon Technologies RFX45
Mount Compatibility:
- Slide cuts and mounts using correct Trijicon RMR footprint dimensions
- SI LITESLIDE for GLOCK™ G17 or G19 GEN3
- Strike Slide for GLOCK™ G17 or G19 GEN3
Note:
- Adapter height from RMR side to bottom of ACRO/MPS: 4.00mm (0.157”)
- Adapter height from RMR side to top: 6.70mm (0.264”)
- Steiner MPS sits offset towards traditional pistol ejection port side since this mount is designed for the ACRO which has an asymmetrical housing
Warning:
- Screws included do not guarantee fitment of all RMR footprint cuts or mounts
- May not work with RMR cuts with threaded posts