Description
Details
Match Grade Die Set
Hornady® Match™ Grade Dies give you total control over neck tension in the resizing process. These dies feature the ability to use interchangeable, self-centering neck size bushings that eliminate the chance of over sizing your case necks and overworking the brass.* Tight tolerances at the press translate into tighter groups at the range. See below for a listing of available dies and bushings.
Available in two styles; full-length sizing and shoulder bump neck size. Both styles utilize interchangeable neck size bushings. Select the bushing your cartridge requires to complete your Match™ Grade Die.
Description:
- Cartridge: 6MM ARC
- Bullet Diameter: 0.243
- Die Product Line: Match™ Grade Bushing Dies
- Die Set: 544257
- Die Series: —
- Full-Length Size Die: 46264
- Seating Die: —
- Expander Die: —
- Taper Crimp Die Only: —
- Neck Size Die: —
- Shell Holder: #6
- 390546
- Shell Plate: #6
- 392606
- Case Feeder Plate: Sm Rfl
- 095314
- Bullet Feeder Die: —
- Trimmer Pilot: #3
- 390945
- Primer Punch: Small
- 396618
- Bullet Puller Collet: #3
- 392156
